San Francisco Bay and Sacramento-San Joaquin Delta DEM version 3 (Superseded)
# Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4
Data files
| Data title and description | Access data | File details | Last updated |
|---|---|---|---|
SF Bay and Sacramento-San Joaquin Delta - Area 1 # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
SF Bay and Sacramento-San Joaquin Delta - Area 2 # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
SF Bay and Sacramento-San Joaquin Delta - Area 3 # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
SF Bay and Sacramento-San Joaquin Delta - Area 4 # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
South Delta (2 meters, v3, Oct, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
Columbia Cut (2 meters, Oct, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
Georgiana Slough (2 meters, Oct, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
Middle River (2 meters, Oct, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
Miner Slough (2 meters, Oct, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
Mokelumne River (2 meters, Oct, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
North Sacramento River (2 meters, Oct, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
Old River at Head (2 meters, Oct, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
San Joaquin River (2 meters, Oct, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
Turner Cut (2 meters, Oct, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
West Canal (2 meters, Nov, 2012) # Superseded: A more recent version of this product appears here: https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-for-modeling-version-4-1 This product will continue to be distributed for archival purposes. # Product The product is a set of mutually consistent 10m and 2m integrated elevation maps (DEM) in standard ascii format.There are few missing data where there is water or at land-water interfaces. However, our map does have gaps at some inland and island sites. We have opted not to fill these because there is an ongoing project at DWR to re-analyze LiDAR returns and improve the terrestrial map. The CSTARS project at UC Davis is doing this as well. This product is developed based on synthesizing LiDAR, single- and multibeam sonar soundings and existing integrated maps collated from multiple sources. The following figure shows the data sources used for different areas. The western part of our Bay-Delta work blends the original Foxgrover map with the 1/3 arc second DEM produced by NOAA. These are close in the region of overlap and edge-matches the NOAA data well, but the NOAA map seems to capture things like bridge footings that the original 10m Foxgrover map of the region smooths. A richer 2m product combining new data and some interpolation is due to be release by USGS in Winter or Spring 2013. Our previews of this map indicate that it is heavily based on the 1/3 arc second NOAA map for points near Carquinez Straits. For more information, please refer to the article: [A Continuous Surface Elevation Map](http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/AR2012/Chapter%206_2012_Web.pdf) Please note that we distribute only our own integrated maps, not the original constituent data. Version: 3 Time Completed: November, 2012 Horizontal Datum: NAD83 Spheroid: GRS1980 Projection: UTM_Zone_10N Vertical Datum: NAVD88 ## Data Sources https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/36a1a7b0-895e-4b10-bc78-1962f523fb05 ## Coverage Areas https://data.cnra.ca.gov/dataset/san-francisco-bay-and-sacramento-san-joaquin-delta-dem-v3/resource/9e7c5963-ba33-4b3d-91a9-5e45671faad4 | Download | ZIP | 08/11/23 |
Supporting files
| Data title and description | Access data | File details | Last updated |
|---|---|---|---|
Data Sources Map # Data Sources: References listed in A Continuous Surface Elevation Map * Miner Slough (multi/single beam, DWR, 2012): Mayr, 2011-2012 * Columbia and Turner Cuts (multibeam, DWR, 2012): Mayr, 2012 * Georgiana Slough (multibeam, DWR, 2011): Mayr, 2011-2012 * North Delta (multibeam, GRS, 2008 & DWR, 2012): GRS,2008; Mayr, 2011-2010 * Old River at Head (multibeam, DWR, 2011): Mayr, 2011-2012 * South Delta (multibeam, Fugro West, 2010 & DWR, 2011): Mayr, 2011; Fugro West, Inc. 2010 * Urban Levee Survey (multibeam, DWR, 2008): Fugro West, Inc., 2008 * Victoria Canal (multibeam, DWR, 2011): Mayr, 2011 * West Canal (multibeam, DWR, 2012): Mayr, 2012 * Liberty Island (single beam, cbec/EDS, 2006, 2009, 2010): EDS, 2006, EDS, 2009; Campbell, 2012 * South Delta Scour Survey (single beam, DWR 2010): Mayr, 2000-2010 * Grant Line Canal 5 Points Area (DWR, 2009): Division of Engineering, DWR, Survey Number Sr09-20 * Delta Coves (grading plan, 2005): Ruggeri-Jensen-Azar & Associates, 2005 * CSDP Bathymetry Survey: CSDP Bathymetry Data http://baydeltaoffice.water.ca.gov/modeling/deltamodeling/models/csdp/csdp.cfm * Deep Water Ship Channel (COE, 2004, 2008): Towill, Inc., 2009 * Manually Digitized Data - P.E. Smith: Smith * USGS Topo Map (Manually Digitized): http://services.arcgisonline.com/arcgis/services * DWR LiDAR (1m, 2007): Dudas, 2010 * Foxgrover, Smith, and Jaffe, USGS (10m, 2005): Foxgrover, Smith, & Jaffe, 2003 http://sfbay.wr.usgs.gov/sediment/delta/downloads.html * NOAA San Francisco Bay DEM (1/3 arc-second) (2010): Carignan, et al., 2010 http://www.ngdc.noaa.gov/dem/squareCellGrid/download/741 * USGS National Elevation Dataset (1/3 arc-sec): http://ned.usgs.gov/ | JPEG | 08/11/23 | |
Coverage Areas * Many of the 2m DEMs are concentrated in the areas of specific channels. They are seamless maps between the water body and surrounding LiDAR beyond the levee crest. The 2m DEMs should match DWR 2007/2008 LiDAR survey (Dudas, J. 2010, LiDAR data for the Delta Area of California). | JPEG | 08/11/23 |
